Panduit MP200 User Manual

22
Top
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Specications
Technical Support
Wrap Mode
Creating Labels to Wrap around Cable
You can repeatedly print text so that it can be seen
regardless of the angle from which the cable is viewed.
Label length
Tape width
Margin
Margin
1. Press .
2. Select the length type with
/ and then press
.
In this example, we will select "Length".
AWG: Sets the length according to the AWG wire size
standards.
Dia: Sets the length by cable diameter.
(Setting range: 0.10 to 5.91" (0.25 to 15.00 cm))
Length: Sets the length by label length.
3. Enter the label length and then press
.
Setting range: 0.39 to 39.36" (1 to 99.99 cm)
4. Select On or O of repeat text with
/ and
then press
.
In this example, we will select "On".
On
O
5. Select the type of margins with / and then
press
.
In this example, we will select "Long".
6. Enter the text.
7. Press
.

Panduit MP200 Specifications

General

Color	No
Printing colors	Black
Print technology	-
Maximum resolution	180 x 180 DPI
Wire wrap printing	Yes
Maximum printing width	25.4 mm
Ribbon width	24 mm
Ribbon length	7 m
Connectivity technology	Wired & Wireless
Display	LCD
Control type	Buttons
Keyboard layout	QWERTY
Battery type	Built-in battery

Weight and Dimensions

Depth	298 mm
Width	136 mm
Height	90 mm