Panduit MP200 - Initializing Printer Settings

15
Top
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Specications
Technical Support
Initializing the Settings
Initialize the settings if the printer does not operate normally
such as when the display is interrupted.
Attention
This function initializes the settings. Take extreme care before
initializing it. All the created text will be lost and the settings
you made will be reset.
1. If the power is on, press to turn it o.
2. Press and hold
+ , and press .
3. When a message appears, press
.
The settings will be initialized.
MEMO
To cancel initialization, press a key other than .