Panduit MP200 User Manual

12
Top
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Specications
Technical Support
Start Here
5. Printing label
1. Press .
Setting the label auto cut to O
"Auto cut"
Printing with special print functions
"Enlarge print"

Checking the print image
+
1. Press
+ .
The print image scrolls on the entire screen.
When the preview ends, the editing screen reappears.
CAUTION
• Do not insert your ngers into the tape eject slot.
• Do not pull the tape until the printing is completed.
Attention
• "Insert tape" will appear on the display if the tape cartridge
is not loaded or not correctly set.
• Length of the label shown on the display is a guide and
may not match the length of the printed label exactly.
MEMO
• To cancel the printing, press .
• Depending on your margin setting or the label type, tape
may be fed and cut before printing.

Panduit MP200 Specifications

General

Color	No
Printing colors	Black
Print technology	-
Maximum resolution	180 x 180 DPI
Wire wrap printing	Yes
Maximum printing width	25.4 mm
Ribbon width	24 mm
Ribbon length	7 m
Connectivity technology	Wired & Wireless
Display	LCD
Control type	Buttons
Keyboard layout	QWERTY
Battery type	Built-in battery

Weight and Dimensions

Depth	298 mm
Width	136 mm
Height	90 mm