Panduit MP200 - Customizing Labels: Serialization; Creating Serialized Labels; Serialized Labels with Copies

32
Top
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Specications
Technical Support
Customizing Labels
Creating Serialized Labels
Up to four digits including numbers (0 to 9) or alphabet
letters (A to Z) can be entered.
MEMO
Printing will not continue from the next sequential number even if
is pressed again after printing has completed. Printing will start from
the rst label set in the number sequence.
To continue printing from the next sequential number, reset the start
value of the rst label to the next sequential number.
1. Press .
2. Enter the start value of the sequential numbers and
then press
.
In this example, we will enter "0001".
3. Enter the end value of the sequential numbers and
then press
.
In this example, we will enter "0005".
4. Enter the increment value and then press
.
In this example, we will enter "2".
5. Press
.
One set of the set labels will be printed.

Creating Serialized Labels with Copies
1. Set the sequential numbers.
"Creating Serialized Labels"
2. Press
+ .
3. Select "Print copies" with
/ and then press
.
4. Enter the number of print copies and then press
.
In this example, we will enter "2".
5. Select "Start print?" with
/ and then press
.
Printing starts.
MEMO
When "Collate" under "Print copies" is set to "Yes", labels will be
sorted and printed.
"Creating Serialized Labels with Collate function"