Panduit MP200 User Manual

9
Top
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Specications
Technical Support
Start Here
2. Installing a tape cartridge
CAUTION
• Make sure that the power is turned o.
• Be sure to use the specied tape cartridge.
• Make sure the top cover is closed rmly.
• If you opened the top cover while a tape cartridge is
installed, check that the tape end is put into the tape
eject slot before beginning operation.
• Take care to keep the label for detecting the tape
cartridge and the sensor of the printer clean.
Otherwise, tape may no longer be detected correctly.
• Do not touch the sensor directly with your ngers.
Label for detection
Sensor
1. Rewind the ink ribbon if
needed.
Use a pen
or a pencil.
2. Open the top cover.
Top cover
3. Install a tape cartridge.
Put the tape end
into the tape eject
slot.
4. Close the top cover.

Panduit MP200 Specifications

General

Color	No
Printing colors	Black
Print technology	-
Maximum resolution	180 x 180 DPI
Wire wrap printing	Yes
Maximum printing width	25.4 mm
Ribbon width	24 mm
Ribbon length	7 m
Connectivity technology	Wired & Wireless
Display	LCD
Control type	Buttons
Keyboard layout	QWERTY
Battery type	Built-in battery

Weight and Dimensions

Depth	298 mm
Width	136 mm
Height	90 mm