Panduit TX6 PLUS - User Manual

2.0" (50.8mm)
0.5"
(12.7mm)
TX6 PLUS and TX5e UTP Jack Modules
Page 1 of 2
INSTALLATION INSTRUCTIONS
©Panduit Corp. 2011
For Technical Support: www.panduit.com/resources/install_maintain.asp
Part Numbers: CJ688TG**, CJD688TG**, CJK688TG**, CJE688TG**,
CJQ688TG**, CJ5E88TG**, CJD5E88TG**, CJK5E88TG**, CJE5E88TG**
CWST
TERMINATION STEPS
1
3
5
2
4
CJ688TG**
Cable End 1
Cable End 2
6
Jack
Wire Cap
Strain
Relief
Collar
Cable End 1 Cable End 2
7
Pr1
Pr2
Pr3
Pr4
Pr4
Pr1
Pr2
Pr3
1
2
CJ5E88TG**
CJD688TG**
CJD5E88TG**
Trim pair separator and/or ripcord if present.
** Denotes color.
Note: For bulk packaged TG Style Jack Modules add -24 to end of part number.
8
EGJT
PN403L

Summary

Installation Instructions

Jack Module Overview and Preparation

Shows the jack module, dimensions, and preparation steps like trimming.

Wire Preparation and Termination Steps

Details wire stripping, untwisting, and routing for termination.

Wiring Diagrams and Tool Usage

Illustrates wiring standards (T568A/B) and the use of the EGJT tool.

Advanced Wiring and Final Assembly

Covers T568A/B wiring details, tool application, and strain relief.

Removal Steps

Removing the Jack Module

Step-by-step guide for detaching the jack module from its housing.

Disconnecting and Re-terminating Wires

Instructions on disconnecting wires and preparing for re-termination.

Panduit TX6 PLUS Specifications