EasyManuals Logo

Pantum M6550 series Faq

Pantum M6550 series
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
36. Why the printer could not feed paper successfully?
There are three possible reasons as below:
1) There is too much paper in the tray:
Solution: Remove excess paper from the tray.
2) The print media is loaded incorrectly:
Solution: Please correctly load the print media.
3) The print media is beyond the usage specification range.
Solution: Please use the print media within the specification range.
37. Why it will be smoked when printing?
The smoking is water vapor, which is caused by the printing environment and paper
status. When we do the printing, the fuser unit will heat the paper to around 180 °C, so

Table of Contents

Other manuals for Pantum M6550 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M6550 series and is the answer not in the manual?

Pantum M6550 series Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
ConnectivityUSB 2.0
Input Capacity150 sheets
Output Capacity100 sheets
FunctionsPrint
Processor600 MHz
Memory128 MB
Duplex PrintingManual
Print Speed22 ppm
First Print Out TimeLess than 7.8 seconds
Recommended Monthly Page Volume2, 000 pages
Media SizesA4, A5, A6, Letter, Legal, Executive
Media TypesPlain, Envelope, Label, Cardstock
Supported Operating SystemsWindows, Linux, Mac OS

Related product manuals