Pantum M6550 series Faq

45. How to “add a printer “by manually under Mac?
Step1: At first, please follow up the instruction of the CD-ROM to install the driver with USB
that is under the MAC system.
Step2: After installed the driver, please chose the Printer icon in PC and log in.
Step3: Click “+” to add the printer.
Step4: Please choose the corresponding model from installed printer when pop up the dialog
box. Then chose the corresponding printer’s driver which installed on PC. (It is needed to be
the same with printer model.) After chose to save, it will be finished to install.

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS