Pantum M6550 series Faq

Press "Start" button - scan the next page
Press "OK" button- end the scanning
Step 5: Put the document to be scanned on the glass platen and press Start button to
continue to scan the second page (For ADF scanning, it can run continuous scan directly).
Step 6: Repeat the operation as described in the step 5 to scan multi-pages till you press
"OK" button to end this operation.
Step 7: After completing the operation, the application will save PDF document to the
specified folder.
59. How to merge multi-page scanned documents into one PDF from
M6600 Series Printer?
Step1: Press "Scan" button to enter scan status. The default scan mode of control panel
is Single Page.

Pantum M6550 series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Functions	Print
Processor	600 MHz
Memory	128 MB
Duplex Printing	Manual
Print Speed	22 ppm
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	2, 000 pages
Media Sizes	A4, A5, A6, Letter, Legal, Executive
Media Types	Plain, Envelope, Label, Cardstock
Supported Operating Systems	Windows, Linux, Mac OS