40. Is my printer compatible with Linux Debian 9 system?
No, our printer did not compatible with Linux Debian 9.
⑤ Normal Printer Issues:
41. Why the printer could not feed paper successfully?
There are three possible reasons as below:
1) There is too much paper in the tray:
Solution: Remove excess paper from the tray.
2) The print media is loaded incorrectly:
Solution: Please correctly load the print media.
3) The print media is beyond the usage specification range.
Solution: Please use the print media within the specification range.
42. Why it will be smoked when printing?
The smoking is water vapor, which is caused by the printing environment and paper status. When we do
the printing, the fuser unit will heat the paper to around 180 °C, so during paper out of the printer, it would
exchange its temperature with surrounding environment.
1, Print environment: when the temperature becomes much lower, the humidity will be much higher, so
the vapor will get heavy. Due to the temperature difference and moist， the water vapor will produce
accordingly. Usually, we suggest the printing temperature is 10-32℃, Humidity (RH) is 20%-80%, and it will
work fine.
To Next Page
Loading...
