5) After installation is finished, “Installation Complete” interface will pop out, and it will be closed
automatically in about 3s.
Then it need to turn to “Previous” , and please setup your PC connect the same WIFI Router before
restart the installation process . Thus it can be successful.
2. How do I setup a password for my WI-FI Connection?
Step1: Make sure M6700/M7100/M6800/M7200 Series printer is power on.
Step2: Connect to Printer AP by mobile phone or PC.
The SSID is start with” DIRECT-***”, and follow with number and character string.
To Next Page
Loading...
