Pantum M6700 - ⑦ Fax Issues-For M6800;M7200 Series Printer; How to Change the Fax Report Status on M6800;M7200 Series Printer

Step 5: Put the document to be scanned on the glass platen and press Start button to continue to scan the
second page (For ADF scanning, it can run continuous scan directly).
Step 6: Repeat the operation as described in the step 5 to scan multi-pages till you press "OK" button to
end this operation.
Step 7: After completing the operation, the application will save PDF document to the specified folder.
⑦ Fax Issues—For M6800/M7200 Series Printer
64. How to change the fax report status on M6800/M7200 Series Printer?
Step1: Select menu on the below control panel
Step2: Select ‘NO.1-fax setting’ by page down button.
Step3: Select ‘NO.14-fax report’ in the fax setting
Step4:
Select ‘NO.2-confirm report’