EasyManuals Logo

Pantum P2200W Faq

Pantum P2200W
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
71 / 79
12. How to change the printing port is available when it showed Printing port is
on used”?
"Printer cannot be configured because printing port is on used." it may cause by PC port is abnormal. We
suggest that you can check with below steps:
Step1: Change to another PC port then reconnects to the printer and re-install the driver.
Step2: Click PC table “start"-"Devices and Printers”, delete the useless printer copy manually (the
mouse right click on the useless printer name, and then delete it).
Then reconnect to the printer and re-install the driver.
Step3: Click PC table “start"-"printer and fax”, chose any of the printer copy, the mouse right click
on the “printer property"--"port”, then chose the customer no need the printer copy port of
all the printers, and click "delete port"-"confirm". At last reconnect to the printer and reinstall
the driver.
Step5: After done all above steps, you will see the connected printer in the Devices and printers

Table of Contents

Other manuals for Pantum P2200W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum P2200W and is the answer not in the manual?

Pantum P2200W Specifications

General IconGeneral
BrandPantum
ModelP2200W
CategoryPrinter
LanguageEnglish

Related product manuals