2-3
2.2. Special Paper
This printer supports using the special paper for printing. Special paper includes: label,
envelope, transparency, thick, cardstock, etc.
| Please observe the following standards:
Types of Print
Media
Correct Practices Incorrect Practices
Label
Use labels with no exposed
lining paper only.
Labels shall be put at when
using.
Use labels of full sheet only.
There is no guarantee that all the
labels in the market can meet
corresponding requirements.
Use wrinkled, blistering or damaged labels.
Envelope
Envelopes should be loaded
evenly.
Use wrinkled, nicked, stuck or damaged
envelopes.
Use envelopes with clips, snaps, Windows, or
coated linings.
Use envelopes with self-adhesive stickers
or other synthetic materials.
Transparency
Use only transparencies
approved for use in laser
printers.
Use transparent print media that is not
suitable for laser printers.
Thick,
Cardstock
Use only heavy paper that
is approved for use in laser
printers and meets the weight
specications of this printer.
Use paper whose weight exceeds the
recommended media specications of this
printer.
Note: • When using special paper or print media, be sure to select matched print type
and size in the print settings so as to get the best print effect.
• When using special media to print, it is recommended to load one piece of paper
at one time. For P2200
/
P2500 series, load one piece of special paper into the
automatic feeder tray at one time. For P2600 series, load one piece of special
paper into the manual feeder tray at one time.
To Next Page
Loading...
Need help?
General
