Pantum P2207 User Manual

3.2. Mac system driver installation
• Driver installation under Mac system is divided into 2 steps, driver installation and adding a
printer. If you are going to print in AirPrint mode, there is no need to install a driver and you
just need to add a printer directly.
• When you are installing a driver with wired or wireless network, you may need to know the
Bonjour name of printer. Please print the “Network setup page” to view it. (Please refer
to Chapter 8.1.1.3).
3.2.1.Driver installation
Mac 10.11 is taken as the example in the following operation. The information on your
computer screen may differ because of multiple operating systems.
1. Turn the power of printer and computer on.
2. Insert the CD companying with printer in the CD driver of your computer, and double click
Pantum XXX Series installation package. (XXX in Pantum XXX Series represents product
model.)
3. Click “Continue”.
4. Read licensing agreement and then click “Continue”.
3-23

Pantum P2207 Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Processor Speed	600 MHz
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Duplex Printing	Manual
Compatible Operating Systems	Windows, Mac OS, Linux
Print Speed	22 ppm
Media Sizes Supported	A4, Letter, Legal, Executive, Oficio, Envelope (C5, DL, Monarch)
Media Types Supported	Plain, Thick, Thin, Cardstock, Label, Envelope
Weight	4.75 kg
Dimensions	337 x 220 x 178 mm
First Print Out Time	Less than 7.8 seconds