9-5
9.2.3. Replace Laser Toner Cartridge
Replacement steps are as follows:
1. Open the upper cover, and remove the empty laser toner cartridge along the guides.
P2200/P2500 Series P2600 Series
2. Open the package of a new laser toner cartridge, hold the handle of the cartridge and
gently shake around 5-6 times, so as to make the toner evenly distributed inside the cartridge.
P2200/P2500 Series P2600 Series
Note: before replacing the laser toner cartridge, please pay attention to the following:
• The laser toner cartridge surface may contain toner. Please remove it carefully to
avoid spilling.
• Put the removed laser toner cartridge on a piece of paper to avoid the toner from
accidently spilling.
• After removing the protective cover, please immediately install the laser toner
cartridge into the printer, so as to avoid photosensitive drum damage caused by
exposing to too much direct sunlight or indoor light.
• While installing the laser toner cartridge, do not touch the surface of the
photosensitive drum so as not to scratch it.
To Next Page
Loading...
