10-7
The vapor
comes out
around
the paper
discharge area
The heat generated during the
toner fusing causes the paper to
vapor (This happens even more
often when you use dampened
paper under low ambient
temperature)
Vapor is not an abnormality in this case,
but still you can use newly unpacked
paper to avoid generation of vapor. Also,
keep your paper from the damp. Power
off the printer and unplug the power
cord when there is a smell of burning.
Then consult Pantum support center. It
may causes the re or the electric shock
if you continue to use the printer under
this situation.
Note: • If the problem remains, please contact Pantum Customer Service.
Trouble Cause Solution
Problems in Handling Paper
To Next Page
Loading...
