III
Installation Location
Place the machine on a flat, stable surface away from sources of vibration and from
people, such as a desktop. Place the machine next to a standard and grounded
electrical socket. The ambient temperature of the installation site should be
between 50 to 90℉ (10 to 32.5℃), with relative humidity between 20% and 80%.
Cautions:
Do not install the printer in crowded areas.
Do not place the printer near heaters, refrigerators, air conditioners, or fluid
and chemical products.
The printer must not be exposed to direct sunlight or installed in overheated,
damp, and dusty areas.
Do not connect the printer to a wall socket or power supply outlet controlled
by an autotimer.
A power failure will cause loss of the information in the device memory.
Do not connect the printer to a power supply outlet that shares the same
circuit with high-power appliances or other devices which could cause power
failure.
Avoid placing the printer near interference sources, such as speakers, cordless
telephone docks, etc.
Ensure adequate ventilation while using the printer for long periods or
printing in bulk in a poorly ventilated room.
To Next Page
Loading...
Need help?
General
