Pantum P3300DN Series User Manual

9.General Settings
9.1.1.Language Setting
"Language Setting" is used to select the language to be displayed on the control panel.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1.System Setting" option.
3)
Press “OK” key to select “1.Language Set” option to set language, as shown in the below
figure:
This Chapter mainly introduces some general settings.
9.1.System Setting
73

Pantum P3300DN Series Specifications

General

Brand	Pantum
Model	P3300DN Series
Category	Printer
Language	English