To Next Page

To Previous Page

6. After the installation, click “Print &Test Page” button. If your printer prints the test page

successfully, it means that you have installed the driver correctly.

3.1.2. Manual installation

• Before installing the drive, you need to learn about printer model by printing printer

information page out and check the product name (please refer to Chapter 9.4 for printing

methods).

3.1.2.1. Installation via USB connection

1. Connect the printer to computer via USB cable, power the printer and computer on.

2. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Vista/Server 2008 system: Pop up “Autoplay” interface, click “Autorun.exe” to

run the installation procedure.

• Windows 8 system: When the “ DVD RW driver” window pops up from the right top corner

of computer desktop, click anywhere in the pop-up window, then click “Autorun.exe” to run

the installation procedure.

• Windows 10 system: When the “DVD RW driver” window pops up from the right top corner

of computer desktop, click anywhere in the window, then click “Autorun.exe” to run the

installation procedure.

Note:• Some computers may be unable to auto play the CD beacase of system

configuration. Please double click “Computer” icon, find “DVD RW driver”, then

double click “DVD RW driver” to run the installation procedure.

3. Click on the “I agree” button on the right buttom corner after reading the license agreement

and enter into driver installation interface.

4. Click on the “Manual installation” at the bottom of driver installation interface, and enter

into manual intallation interface.

5. Please select installation language and printer model.

6. Select “Connect via USB” and click on “Install”.

Pantum P3300DN Series User Manual

Questions and Answers: