2.3.Loading Paper
2.3.1.Loading into the Automatic Feeder Tray
1. Slide out the automatic feeder tray from the printer.
2. Slide the clip of extended tray of auto feed tray, paper length deflector and paper
width deflector to the slot suitable for paper size, in order to match paper length and width.
Note： • Do not overly squeeze the "paper length guide" and "paper width guide",
otherwise it could easily lead to deformation of paper.
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error,
and then load the paper into the tray print-side down.The automatic feeder tray can be
loaded up to 250 pages, 80g/m² paper.
To Next Page
Loading...
