Paradox K636

To send an audible alarm to your Security
Company, press and hold one of the button
combinations listed for 3 seconds.
When a trouble condition occurs, the [
TBL]
key will illuminate.
1. Press the [
TBL] key. The key will flash
and number(s) corresponding to the
trouble(s) will illuminate.
2. Read the corresponding explanation
from the trouble list in the Esprit E55
User Guide.
3. Press the [
CLEAR] key to exit.
To view the alarms that occurred during the
last armed period:
1. Disarm the system.
2. Press the [
MEM] key.
3. The corresponding zone numbers
that were in alarm the last time the
system was armed will illuminate.
4. Press the [
CLEAR] key to exit.
To mute the keypad:
Press and hold the [
CLEAR] key for 6
seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the [
MEM] key for 3
seconds.
2. The [
MEM] key will illuminate.
3. Press the [
MEM] key to set the desired
backlight level.
4. Press [
CLEAR] twice to exit.
PANIC ALARMS
Panic Alarm Type Button
Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
TROUBLE DISPLAY
ALARM MEMORY DISPLAY
KEYPAD SETTINGS
Bypassed zones remained unarmed when
the system is armed.
1. Press the [
BYP] key.
2. Enter your [
ACCESS CODE].
3. The corresponding key of all open
zones will illuminate. Select the
zone(s) you want to bypass by
entering the one-digit zone number.
The zone key will flash.
4. Press the [
ENTER] key to save and
exit.
A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.
1. Press & hold the corresponding zone
key for 3 seconds (Accept beep =
Chime enabled, Fail beep = Chime
disabled).
BYPASS PROGRAMMING
CHIME PROGRAMMING
© Paradox Security Systems Ltd., 2008. Esprit
E55 is a trademark or registered trademark of
Paradox Security Systems Ltd. and its affiliates
in Canada, the United States and/or other
countries. All rights reserved.
Printed in Canada 02/2008 PARADOX.COM K636-EQ00