REM25-EU00 05/2019
PARADOX.COM
Introduction
The REM25 is a two-way wireless remote control that allows you to safely arm
and disarm your Paradox security system and receive feedback on your
actions.
Button Assignment
The REM25 can perform up to six different functions that allow you to control
your system. It initiates communication with your Paradox security system,
receives acknowledgment confirmation for your requests and provides the
current status of your system. Actions include verifying the status of your
system, activating programmable outputs (PGMs) such as lights, garage doors,
and arming/disarming your system, refer to Figure 1 for details.
Figure 1 – REM25 Buttons
Configuring Button Actions
The REM25 buttons are pre-configured as per Figure 1. Your dealer can modify
the above buttons by using the BabyWare software to associate them to
different actions. For example, re-assign the Arm button from Regular Arm to
Stay Arm.
REM25 Remote Control Action / Feedback
The following table provides the supported visual and audio feedbacks for the
REM25.
* Transmission failed or confirmation from the panel was not received.
LED
Arm system
Activate/deactivate
PGM 1
Activate/deactivate
PGM 2
Disarm system
System status
Action LED Feedback
Audible
Feedback
ARM button: confirmation Red 5 quick beeps
DISARM button: confirmation Green 2 quick beeps
PGM 1 /2 button: confirmation Orange 5 quick beeps
i button with system armed Red 5 quick beeps
i button with system disarmed Green 2 quick beeps
Fail* Flashing Orange
(fast)
1 long beep
To Next Page
Need help?
General
