Need help?Do you have a question about the Paragon EC72 Series and is the answer not in the manual?
Details the EC72 and EC72D time controls' ability to switch two electrical circuits based on a pre-set time-of-day program.
Explains the Momentary Option and Manual Override for specific control needs.
Provides step-by-step instructions for mounting the EC72 in its NEMA 1 metal case.
Instructions for mounting the EC72D on a vertical or horizontal surface using the back mounting plate.
Details how to snap the EC72D base connection block onto a DIN-rail.
Instructions for purchasing and installing a 9-volt battery for backup power.
Guides wiring to terminals 1 and 2 and cutting the terminal cover, including a voltage caution.
Provides step-by-step instructions for converting the EC72 to a momentary output control by clipping a jumper wire.
Details removing the EC72D and clipping jumper wire J29 to convert it to momentary output.
Provides a sequence of key presses and entries to set the current time, day, month, and year.
Guides through programming ON/OFF events, selecting channels, time, and day of week for each event.
Addresses issues like no output, manual override failure, display problems, and programming errors.
To Next Page
General