Need help?Do you have a question about the Paragon EC72D/12 and is the answer not in the manual?
The EC72 and EC72D are seven-day, two-channel time controls that will switch two different electrical circuits.
Each day of the week can be uniquely programmed.
Supports up to 16 ON/OFF events per channel and repeat programming functionality.
Details momentary output conversion and manual override capabilities.
Details power requirements, Hertz, and VA requirements for different models.
Details relay contact ratings and terminal wire gauge capacity.
Steps for mounting the EC72 in its NEMA 1 case, including spring clip and grounding.
Details on wiring input power to terminals 1 & 2 and output connections.
Instructions for purchasing, installing, and replacing the 9-volt backup battery for power outages.
Caution: Incorrect input voltage application will void the warranty.
Steps to disconnect power, remove control, and clip jumper wire J1 for EC72 conversion.
Instructions to remove control and clip jumper wire J29 for EC72D conversion.
Provides step-by-step guide and reference chart for setting time, day, date, and year.
To Next Page
General