Paragon GUARDIAN - Table of Contents

TABLE OF CONTENTS
SECTION
PAGE
1.0 BASIC OPERATION 1
2.0 GUARDIAN FEATURES 1
2.1 Power Supply
2.2 Alarm Status
2.3 Alarm Selection
2.4 Audible Alarm Acknowledge
2.5 Remote Alarm Relay
2.6 Remote Room Pressure Selection
2.7 Remote Auxiliary Alarm
2.8 Display
2.9 Display Selection
2.10 Key Locked Access Door
3.0 CENTRAL MODULE CONFIGURATION 2
3.1 Equipment Required
3.2 Positive/Negative Space Pressure Alarming
3.3 Remote Positive/Negative Space Pressure Selection
3.4 Audible Alarm Activation/Deactivation
3.5 Analog Space Pressure Output Signal
3.6 Process Output Selection
4.0 PRE-STARTUP CHECK 3
4.1 Equipment Needed
4.2 Pre-Startup Check
5.0 DIFFERENTIAL PRESSURE TRANSDUCER CALIBRATION 4
5.1 Equipment Needed
5.2 Calibration Procedure
6.0 -2.5v REFERENCE, ANALOG OUTPUT AND DISPLAY SCALING CALIBRATION 5
6.1 Equipment Needed
6.2 Calibration Procedure