7
TRANSMITTER
1. Registration button — used to link the transmitter to a receiver unit.
2. “Picture” LED indicates when transmitter unit is receiving a supported sig-
nal and is capable of video sync to one or more receivers
3. “Sync”LEDindicatesstatusofthetransmitter/receiverconnection.Ifash-
ing, transmitter has lost or is searching for a connection to receiver units
4. HDMI connector — connect to your desired video output source to origi-
nate your video signal
5. Mini USB port — Arrow Transmitter receives power through this mini USB port
To Next Page
Loading...