Paralinx Arrow MX888R - Troubleshooting; Registering Multiple Receivers

13
REGISTERING MULTIPLE
RECEIVERS
To add additional Receivers simply Power Down any synced Receivers and
Follow Steps 1– 8 for Each Additional Receiver.
TROUBLESHOOTING
a. Iftransmitter“SYNC”lightissolid,but“PICTURE”isashing,checkyour
video source to ensure it is a supported frame rate or resolution and double
check the video connection is established.
b. Iftransmitter“PICTURE”LEDissolidbut“SYNC”isashing,checkifReceiver
unit is powered up and in range of Transmitter.
c. IfTheNETWORKLEDashesrapidlyandthereisnodisplayonthemonitor,
power cycle the unit. If the issue remains, the device might be faulty. Please
contact PARALINX support team.