Parker Hydraulics GRESEN V10 - Power Beyond Sleeve

Model V10 Service Bulletin HY14-2701-M1/US - TORO Specific
Revision: 01-01-2005 9
Power Beyond Sleeve (machines with front loader only)
Torque Option Cavity Cartridge
To: 18 - 20 Ft Lbs [24 - 27 Nm]
1
2
3
4
Power Beyond Sleeves
(for front loader equipped machines)
Figure 5. Power Beyond Sleeve (machines with front loader only)
Ref No. Description Quantity
1
2
3
4
SAE 10 Power Beyond Kit, Complete
Power Beyond Sleeve (SAE 10)
O-Ring Seal 
Back-Up Ring 
O-Ring Seal 
1
1
1
1
 Buna-N seals are standard for all Parker valve assemblies.
 Continuous Back-Up Rings are installed at the factory using special sizing tools. It is Not necessary to replace the original Back-
Up Rings unless they have been damaged. See Page 8 for Back-Up Ring Preparation and Installation procedures.