Bulletin HY25-1380-M1/US
Owner’s Manual
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
11
Installation Instructions
Mounting the P.T.O. on the Transmission (Continued)
Fig. 10
Fig. 9
Fig. 11 (Right side shown)
Fig. 13Fig. 12
9. If using a rotatable flange see page 34 for bolt
torque specifications. (Fig. 9).
10. Securely attach the high pressure line to the
P.T.O. valve (Fig. 10).
11. Use the special fitting to securely attach the
high pressure line to the transmission. This
fitting is included with the P.T.O. (Fig. 11). See
the chart on page 12 for the correct hose
specifications. With the hose and P.T.O.
securely connected, refill the transmission to
the manufacturer’s suggested specifications.
12. Complete the assembly by installing
the electrical connection to the valve
assembly (Fig. 12) and the pressure
switch (Fig 13).
Allison World Transmission P.T.O.s
Parker
lchelsea
To Next Page
Loading...