Bulletin HY25-1380-M1/US
Owner’s Manual
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
5
Installation Instructions
Chelsea P.T.O. Safety Label Instructions
1. The two black and orange on white 5" x 7" pressure sensitive vinyl labels, part number 379274; must
be placed on the vehicle frame rails (one (1) on each side), in a position that would be HIGHLY
visible to anyone that would go under the truck near the P.T.O. rotating shaft. If the vehicle is to be
painted after these labels are installed, cover them with two (2) blank masking covers. Remove the
masking covers after painting.
2. Place the one (1) black and orange on white 3.5" x 5" pressure sensitive vinyl label, part number
379275, on the visor nearest the operator of the vehicle, this must be placed near the P.T.O. visor
label.
3. Place the one (1) red and white with black lettering 3.5" x 7.5" pressure sensitive vinyl label, part
number 379915, on the opposite side of the visor from the above label # 379275.
4. Place the one (1) white and black heavy duty card, part number 379276, in the vehicle glove box.
Again in a position highly visible to the operator, for example: try to place this card on top of whatever
may be in the glove box.
If you require labels, please order part number 328946X at no charge from your local Chelsea
Warehouse or send request direct to:
Parker Hannifin Corporation
Chelsea Products Division
8225 Hacks Cross Road
Olive Branch, MS 38654
Customer Service: (662) 895-1011
10-Bolt Powershift P.T.O.s
Parker
lchelsea
To Next Page
Loading...