Parker D1VW Series - Model Code; Standard Valves

Directional Control Valves
Bulletin HY14-2536-M6/US
Bul HY14-2536-M6.indd, dd
1
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio, USA
Model Code Series D1VW, H Style
Standard Valves
NFPA D03
CETOP 3
DIN NG6
Code Description
N Nitrile
V Fluorocarbon
E
* EPR
D
Directional
Control Valve
Basic Valve Actuator Spool Style
Seal
Solenoid Voltage
1V
Code Description
W* Solenoid,
Wet Pin,
Screw-in
HW* Reversed
Wiring
* Contact HVD for
availability.
* Valve schematic symbols are per NFPA/ANSI stan
-
dards, providing flow P to A when energizing solenoid
A. Note operators reverse sides for #008 and #009
spools. See installation information for details. To
configure per DIN standards (A coil over A port, B
coil over B port) code valves as D1VHW***.
Code Description
A** 24/50 VAC
D 120 VDC
G 198 VDC
J 24 VDC
K 12 VDC
L 6 VDC
N*** 220/50 VAC
P*** 110/50 VAC
Q** 100/60 VAC
QD 100/60 - 100/50 VAC
R 24/60 VAC
T 240/60 - 220/50 VAC
U 98 VDC
Y 120/60 - 110/50 VAC
Z 250 VDC
** High Watt only
*** Explosion Proof only.
Code Symbol Code Symbol
001 011
002 014
003 015
004 016
005 020*
006 026*
007 030**
00 8*, 081
009**
010 082
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
A B
P T
* 008, 020 & 026 spools have closed crossover.
** 009 & 030 spool have open crossover.
See Universal Spool Chart for other spool options.
A B
P T
A B
P T
Code Description Symbol
B* Single solenoid, 2 position, spring offset.
P to A and B to T in offset position.
C Double solenoid, 3 position,
spring centered.
D† Double solenoid, 2 position, detent.
E Single solenoid, 2 position, spring centered.
P to B and A to T when energized.
F‡ Single solenoid, 2 position. Spring offset,
energized to center. Position spool spacer on
A side. P to A and B to T in spring offset position.
H* Single solenoid, 2 position, spring offset.
P to B and A to T in offset position.
K Single solenoid, 2 position, spring centered.
P to A and B to T when energized.
M‡ Single solenoid, 2 position, spring offset,
energized to center position. Spool spacer on
B side. P to B and A to T in spring offset position.
A B
P T
b
A B
P T
b
a
A B
P T
b
A B
P T
b
A B
P T
b a
A B
P T
a
A B
P T
a
A B
P T
a
* 020, 026 and 030 spools only.
† 020 and 030 spools only.
‡ High Watt only.
Bold: Designates Tier I products and options.
Non-Bold: Designates Tier II products and options.
These products will have longer lead times.