What to do if Parker Portable Generator is not powered?
If your Parker Portable Generator isn't powering on, check these items: 1. Ensure the generator is connected to a 'Live' power supply. 2. Verify the ON/OFF switch is in the 'I' (on) position. 3. Inspect the fuse in the IEC320 socket and the fuse in the supply cable plug (UK only). 4. Check that the electrical supply cable isn't damaged.
What to do if the compressed air supply of Parker Portable Generator is contaminated?
If the compressed air supply for your Parker Portable Generator is contaminated, carefully open the drain on the inlet filter at the rear of the generator. If condensate drains out, the compressed air supply doesn't meet the required quality. Consider installing a small compressed air dryer upstream of the generator.
General| Brand | Parker |
|---|---|
| Model | domnick hunter UHP10ZA-S |
| Category | Portable Generator |
| Language | English |
Outlines user responsibilities and critical safety precautions for operating the generator safely.
Explains the various warning labels and international symbols used on the equipment and in the manual.
Provides detailed technical specifications for various models, including air quality, pressure, flow rate, and electrical data.
Lists the safety and electromagnetic compatibility (EMC) standards the equipment has been tested against.
Details the materials used for the various components and construction of the generator.
Specifies the physical dimensions and weight for each model of the zero air generator.
Provides guidelines for storing and safely unpacking the equipment prior to installation.
Identifies and describes the key components and external features of the generator.
Details ideal environmental conditions, space clearances, and ventilation needs for generator placement.
Specifies critical requirements for the air inlet supply purity and electrical connections for generator operation.
Illustrates typical system configurations for connecting the generator to application instruments.
Lists specific part numbers for components required for system installation, such as valves and fittings.
Provides detailed instructions for connecting the generator to the air supply, electrical supply, and for stacking.
Provides a basic overview of the generator's display and key temperature settings for different models.
Step-by-step instructions for safely starting the zero air generator and verifying operation parameters.
Procedures for safely shutting down the generator, including depressurization and cooling steps.
Instructions for cleaning the generator using appropriate methods to avoid damage to components and labels.
Outlines the recommended service intervals and tasks for maintaining the generator based on operating hours or time.
Lists available service kits for routine maintenance, categorized by recommended service type (A, B, C).
Provides a template for logging service dates, performed by, and comments for tracking maintenance history.
Explains common fault messages displayed on the controller and suggests actions to resolve them.
Addresses poor quality results due to high hydrocarbon levels, potential causes, and recommended actions.
Provides troubleshooting steps for when the generator's controller display fails to power on.
Discusses causes and solutions for excessive downstream temperatures, such as fan issues or blocked vents.
To Next Page
