Parker H2PEMPD-1300 - User Manual

Bulletin TI-H2PEMPD-D Installation, Operation and Maintenance Manual
Hydrogen Gas Generator H2PEMPD Series
www.parker.com/fns/balstonlabgenerators
1
1-800-343-4048
Parker Hydrogen Gas Generator
Installation, Operation, and Maintenance Manual
Models H2PEMPD-510, H2PEMPD-650,
H2PEMPD-850, H2PEMPD-1100, H2PEMPD-1300

Parker H2PEMPD-1300 Specifications

General

Fuel Type	Gasoline
Power Output	1300W
Engine Displacement	80cc
Run Time at 50% Load	8 hours
Engine Type	4-stroke, OHV
Starting System	Recoil
Outlet Types	1x 12V DC

Summary

1 Safety Information

1.1 Markings and Symbols

2 Description

2.1 Technical Specification

Details the technical specifications of the generator, including performance parameters and requirements.

3 Installation & Setup

3.1 Recommended system layout

3.2 Connecting the generator

Details the procedure for connecting the generator, including environmental filters, hydrogen outlet, and drains.

3.4 Starting up the Generator

Provides step-by-step instructions for safely starting up the hydrogen generator for the first time.

4 Operating the equipment

4.1 Overview of controls

4.2 Starting the equipment

Details the steps to connect the generator to power and initiate the startup sequence.

4.3 Operating Menus

4.5 Stopping the equipment and depressurizing

5 Servicing

5.1.1 Service Intervals

5.3 Consumable Replacement Procedures

6 Error Messages