Parker F1 Series - Specifications, design and function; Design and function

4
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series F1/T1
HY30-5501-M1/UK
eliminates a separate drain line to the tank. F1 is
direct to PTO´s with ZF standard.
F1 is a piston pump with sherical pistons (1)
o
to the shaft (3). When the shaft
rotates, the pistons move up and down in the cylin-
connects the cylinder barrel to the drive shaft, cau-
Design and function
F1 frame size 25 41 51 61 81 101
Displacement [cm
3
/rev] 25,6 40,9 51,1 59,5 81,6 102,9
1)
[l/min]
2)
185
2)
Max operating pressure [bar]
continuous 350 350
intermittent 400 400
Shaft speed [rpm]
1)
2600 2400 2200 2200 2000
2)
1800
2)
at 400 bar
1) 2)
Torque [Nm]
Input power [kW]
Weight
on mineral oil at a viscosity of 30 mm
2
/s (cSt).
2) Valid with 2
1
/
2
” inlet (suction) line.
Pump cross section
2
4
6
4
1
5