EasyManua.ls Logo

Parker AFL Series User Manual

Parker AFL Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AFL Series Pump
Operation and Maintenance Manual
Air Driven, High Pressure Liquid Pump
Catalog: 02-9309ME March 2013
Question and Answer IconNeed help?

Do you have a question about the Parker AFL Series and is the answer not in the manual?

Parker AFL Series Specifications

General IconGeneral
BrandParker
ModelAFL Series
CategoryWater Pump
LanguageEnglish

Summary

Introduction to AFL Series Pump

Meaning of Safety Words

Safety messages use alert symbols and signal words to indicate risk level for potential hazards.

Product Specifications

Details pump geometry, materials, working pressure/temperature, ratio, displacement, and repair kits.

Pump Unpacking and Inspection

Instructions for opening carton, examining contents for damage, and verifying model number.

Required Installation Tools

Minimum tools include torque wrench and open end wrench adapter for installation.

Pump Installation Guidelines

Compressed Air Supply Requirements

3/4" FNPT drive port. Pilot valve requires unregulated filtered air for start-up.

Liquid Section Connections

High pressure outlet on side, suction inlet at bottom. Use 100 mesh filter before inlet.

Pump Start-Up Procedure

Process Media Compatibility

Suitable for oil, water, oil/water mixtures. Special seals for chemical service.

Pump Functionality Explained

Suggested Maintenance Schedule

Periodic inspections for safe operation. Schedule depends on usage, media, and conditions.

Troubleshooting Pneumatic Issues

Troubleshooting High Pressure Liquid Issues

Pump Service and Support

Related product manuals