Need help?Do you have a question about the Parker Series V14 and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Series | V14 |
| Inlet Port Size | 1/2" NPT or BSPP |
| Outlet Port Size | 1/2" NPT or BSPP |
| Power Source | Electric |
| Housing Material | Cast Iron or Stainless Steel |
| Impeller Material | Bronze or Stainless Steel |
| Seal Type | Mechanical Seal |
Shows shaft rotation vs. direction of flow for the bi-directional V14 motor.
Recommends a 10 µm (absolute) filter for maximum motor service life.
Specifies recommended case pressure ranges for V14 motors at different shaft speeds.
Details the minimum inlet pressure required to prevent cavitation and performance degradation.
Defines maximum allowable operating temperatures for the V14 motor.
Details the components and function of the AC control module with a diagram.
Illustrates port connections and restrictor positions for the AC control.
Step-by-step guide for setting the pressure for AC, AD, and AH pressure compensators.
Explains HP control function with decreasing pilot pressure and its effect on displacement.
Shows port connections and restrictor positions for EO, EP, HO, and HP controls.
Procedure for setting the pressure cut off for HPC and HP controls.
Instructions for changing displacement spacers and socket head cap screws.
To Next Page
