Parker Series V14 - Change of Control Spring Kit and Filter (AC, AH, AD)

31
Parker Hannin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series V14
Bulletin HY30-5510-M1/UK
Change of Control Spring Kit and
Filter (AC, AH, AD)
Turn the adjustment screw counter clock-
wise. Remove the spring kit.
Change the spring(s).
Put the new spring kit in position and turn
the adjustment screw clockwise until the
spring is preloaded.
If you need to change the lter remove it
and place the new lter with the rounded/
meash surface upwards (i.e. the same way
as the oil ows).
When the lter has been disassembled it
has to be changed.
lter