Parker P2 Series - Definitions and Notes; Notes, Cautions, and Warnings; Disclaimer and Warranty Information

PUMP AND MOTOR DIVISION
Neefestraße 96
09116 Chemnitz, Germany
3 Suction, pressure and drain line connection
3.1 Connection P2
Minimum pump inlet pressure under static and dynamic load: p
in min
= 0,8 bar absolute
Maximum pump inlet pressure: p
in max
= 10 bar
Arrangement outside tank.
Fill pump case with oil before start.
Do not restrict suction line.
Arrangement outside tank.
Fill pump case with oil before start.
Do not restrict suction line.
3.1.1 Arrangements P2
www.comoso.com