46 47
THE HARNESS
NOTE: Ensure engine is turned o before using the quick release hook
WARNING! Before using quick release hook place machine on a solid surface, dropping the machine will cause damage to the unit.
i
Easily attach and release the machine from
the harness using the quick release hook.
To release the unit from the hook pull the
orange tab.upwards.
Please make sure the machine is properly
secured or supported before releasing the
quick release hook to prevent damage.
After use of the quick release hook it will
need to be re-assembled.
Place the lower hook over the upper hook
with orange tab attached.
Place the release pin through the slot in the
upper hook making sure that the pin passes
over the lower hook.
The quick release hook is now re-assembled
and ready to be used again when needed.
1
QUICK RELEASE HOOK
7 8
REPLACE LOWER HOOK
9
INSERT RELEASE PIN
THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK
To Next Page
Loading...