Parker PGMT-5200 - Other Maintenance and Specifications; Machine and Attachment Maintenance

76 77
MAINTENANCE & CARE
Before starting work After finishing work or daily After each refuelling stop Weekly Monthly Yearly If problem If damaged As required
OTHER
Complete machine
Visual inspection (condition, leaks) X X
Clean X
Cutting Attachment
Visual inspection X X
Replace X
Check tightness X X
Cutting Attachment Guard Attach X
Control Handle Check operation X X
Metal Cutting Attachment Sharpen X X
All accessible screws and nuts Re-tighten X X
Anti-vibration Elements Check X X X
Engine: 10mm
Model 1E44F-5
Displacement 52,0cm3
Fuel Mixture (Gasoline 40: Oil 1)
Carburettor Diaphragm type
Ignition System Transistor Controlled Flywheel Magneto
Spark Plug LD BM6A
Fuel Tank Capacity (cm) 1.2 Litres
Starter Recoil
Clutch Centrifugal
Cutting Head Rotating Direction Counter-Clockwise (Operator View)
3 Tooth Blade Size 1.4 x 255 x 254
Spool Wire Size 2.4mm
Chainsaw Max Cutting Length 290mm
Chainsaw Oil Tank Capacity 150ml
Hedge Trimmer Max Cutting Length 390mm
Hedge Trimmer Max Cutting Diameter 19mm
Hedge Trimmer Adjusting Angle 90 to 270
Overall size (L x W x H) 1860 x 610 x 520mm
Dry weight 8.5kg
SPECIFICATIONS