34 35
CUTTING HEIGHT ADJUSTMENT
3
OPERATION
OPERATION
The cutting height is adjusted with the cutting height
adjusting handle. Pull the handle out and select the
desired cutting height. When released the handle snaps
Into position.
From position 1 to position 7. The cutting height ranges
from 25mm to 75 mm
MAX
TO
MIN
MAX
MIN
mm 25mm
SELF PROPELLED FUNCTION
Release the engine start/stop lever, it will return to its Initial
position and the engine will automatically switch o.
This unit equipped with self-propelled system. If you press
the drive lever (clutch lever), the lawnmower will start to
move with the engine running. To stop, simply release the
drive lever..
STOPPING THE ENGINE
1
2
+
-
WARNING: Only utilise the cutting height adjustment handle when engine is switched o and the machine ie stationary.
To Next Page
Loading...