English
16/20
PSE 120-350
6.2.3 Probe menu
Touch to enter.
Touch to go ahead.
real-time probe values are displayed:
iB0 : Dew point temperature.
iB2 : Evaporator temperature.
iB8 : Discharge compressor temperature.
iB5 : Suction compressor temperature.
iB3 : Ambient temperature.
iP1 : High pressure (condenser).
6.2.4 Digital input menu
Touch to enter.
Local ON/OF: green when remote start contact is closed, otherwise it is gray.
Condensate level: green when there is condensation to drain, otherwise it is gray.
Monitoring phase: green when phase sequence is correct, otherwise it is gray:
Compressor protection: green when compressor protection is in the normal operating position, other-
wise it is gray.
High Pressure switch: green when pressure switch protection is in the normal operating position,
otherwise it is gray.
Low Pressure switch: green when pressure switch protection is in the normal operating position,
otherwise it is gray.
To Next Page
Loading...
