Parker TC1475 - Electrical Specifications

Designs and specifications are subject to change without notice.
WARNING
The chassis in this receiver is partially hot. Use an isolation
transformer between the line cord plug and power receptacle, when
servicing this chassis. To prevent electric shock, do not remove cover.
No user-serviceable parts inside. Refer servicing to qualified service
personnel.
TC1475 / TC2175 / TF2139 3
Electrical Specifications
Electrical Specifications
2.
Model Number
RF system PAL-M/N 、NTSC-M
Video system PAL-M/N 、NTSC-M
AIR
CATV（STD)
CATV（HRC)
Receiving
channel
CATV（IRC)
Channels preset 181
Antenna input 75 Ohm Coaxial Cable
Picture tube 37cm~ 86cm(14”~ 34”) diagonal
Audio output 14” 、 21”: Maximum 2.5W× 2
25” 、 29”、34”: Maximum 5W× 2
Power source AC90V~ 260V（OR AC130~ 260V）50/60Hz
Weight(Approx) 14”(11Kg), 21”(24Kg), 25”(30Kg),29”(38Kg)
Dimensions
(W× H× D) (Approx)
14” 450(W)× 410(D)× 378(H)mm
21” 580(W)× 515(D)× 520(H)mm
25” 750(W)× 528(D)× 560(H)mm
29” 840(W)× 570(D)× 650(H)mm
Power Consumption 14”=65W 21”=75W 25”=120W
29”=130W 34”=150W