Parkit360 Force Owner’s Manual 10
Engaging the Wheels and Freewheel mode:
The Freewheeling knob is used to change the wheels from engaged to freewheeling
mode.
Pull and turn the knob (clockwise) to put the unit into freewheeling mode.
Pull and turn the knob (clockwise) to re-engage the wheels.
To engage the wheels, it’s important that the knob return to the fully seated
position or damage may occur to the transmission. When the unit is new, you
may need to move the unit, rocking the wheels back and forth a bit to make sure
it’s properly seated.
www.parkit360.ca
To Next Page
Loading...
