How to prevent creosote build-up in my Parkray ASPECT 4/4 COMPACT Wood stove chimney?
To address creosote build-up in your Parkray Wood stove chimney, use dry, seasoned wood with a moisture content less than 20%. Also, operate the appliance at a high temperature for short periods each time you use it. This helps avoid large build-ups of tars and creosotes.
What to do if Parkray Wood stove appliance is operated at low temperatures continuously?
If your Parkray Wood stove appliance is operated at low temperatures continuously, operate it at high output for short periods. Also, see the instructions for correct use of air control.
Why do the firebricks and glass get dirty in my Parkray ASPECT 4/4 COMPACT?
If the firebricks or glass of your Parkray Wood stove are dirty, it may be due to using wood with a moisture content over 20%. Use dry, seasoned wood with less than 20% moisture content.
Why is the glass blackening on my Parkray ASPECT 4/4 COMPACT Wood stove?
If the glass of your Parkray Wood stove is blackening, it might be because you're using poor-quality wood. Switch to dry, seasoned wood with a moisture content below 20%.
How to fix incorrect use of air control in Parkray ASPECT 4/4 COMPACT?
See user instructions for correct use of air control on your Parkray Wood stove.
General| Type | Wood stove |
|---|---|
| Heat Output | 4.5kW |
| Nominal Output | 4.5kW |
| Flue Size | 5" (125mm) |
| Weight | 56kg |
| Flue Outlet | Top or Rear |
| Flue Position | Top or Rear |
| Maximum Log Length | 250mm |
| Energy Efficiency Class | A |
| Fuel Type | Wood |
To Next Page