Parkray ASPECT 4/4 COMPACT - Remove Internal Components

9
Removing Internal Components
All internal components must be removed prior to fitting the stove. This will make handling the stove easier; allow
access to fixings and the flue outlet; as well as protect the internal components from damage during the installation
process.
Fuel Retainer
Bottom Grate Brick
Side Bricks
Open the door and remove the fuel
retainer. (A) Lift upwards (B) push
inwards and then remove from the
body.
Lift up baffle and pull the top
of the brick inwards (A) and
then remove from stove (B).
Lift up bottom grate brick on one
side (A) and slide out of stove (B).