40
Mounting accessories on the scale
(15) (Fig.B)
1. Guide the desired accessory (Par-
allel guide (16), Circle cutter (28))
from below to the scale (15).
2. Secure the accessory with the
screw (44).
Attachment tool
Function Attachment tool
Max.
per-
mitted
speed
[min
-1
]
Speed
level ≤ Use
Protru-
sion a
[mm]
Drilling HSS drill (22) 32000 6 Woodworking 20
Plastic brush (30) 15000 3 Cleaning on
plastic or steel
9–15Polishing, Clean-
ing
Felt polishing
disc (large) (32);
Felt polishing
disc (small) (33)
20000 4 Machining vari-
ous metals and
plastics, espe-
cially precious
metals such as
gold or silver
12–18
Cleaning, Sand-
ing/grinding at
low pressure
Polishing sander
(31)
20000 4 Cleaning/sand-
ing on wood,
plastic and soft
metals such as
aluminium, cop-
per and brass
9-15
Grinding disc
(35)
20000 4 12–18
Grinding belt (40) 32000 6 10
Sandpaper (36) 20000 4
Sanding work on
wood, fine work
on hard materi-
als such as alloy
steel
12–18
Silicon carbide
mounted point
(38)
20000 4 Grinding work
on stone, glass,
ceramics, por-
celain and non-
ferrous metals
10
Sanding/grinding
Corundum
mounted point
(37)
25000 5 Grinding work on
stainless steel,
aluminium, brass
and copper
10
Cutting Cutting disc
(29); Cutting disc
(small) (34)
32000 6 Machining metal,
plastic and wood
12–18
To Next Page
Loading...
