Parkside Performance PPFBSA 12 A1 - Guarantee; Service; Troubleshooting

GB
MT
45
Directive 2012/19/EU on waste
electrical and electronic equip-
ment:
Consumers are legally obliged to re-
cycle electrical and electronic equip-
ment in an environmentally sound
manner at the end of its life. In this
way, environmentally friendly and re-
source-saving recycling is ensured.
Depending on the implementation in
national law, you may have the fol-
lowing options:
• Return to a shop,
• Hand over to an official collection
point,
• Return to the manufacturer/distrib-
utor.
This does not affect accessories en-
closed with the old devices or tools
without any electrical components.
Troubleshooting
The following table will assist you in fixing faults:
Problem Possible cause Error correction
Rechargeable battery (18)
not inserted
Inserting the battery
(Fig.C), p.43
On/Off switch (5) is
broken
Contact the service
centre.
Rechargeable battery (18)
discharged
Charging the battery,
p.42
Device does not start
Defective motor Contact the service
centre.
Reduce pressure on at-
tachment tool
Engine is slowing down
and stops
Device is overloaded
through workpiece
Workpiece unsuitable
Attachment tool does not
rotate smoothly, abnormal
noises can be heard
Attachment tool defective Change grinding disc
Device works with inter-
ruptions
Internal loose contact
On/Off switch (5) is
broken
Contact the service
centre.
Service
Guarantee
Dear Customer,
This product is provided with a 5year
guarantee from the date of pur-
chase. In case of defects, you have
statutory rights against the seller of
the product. These statutory rights
are not restricted by our guarantee
presented below.
Terms of Guarantee
The guarantee period begins on the
date of purchase. Please retain the
original receipt. This document is re-
quired as proof of purchase. If a ma-