To Next PageTo Next PageWhy does the output current not decrease on my Parkside Performance Cutter?
If the output current on your Parkside Performance Cutter does not decrease, it may be because the input voltage is too low. Observe the input voltage according to the type plate. It could also be that the connection cable cross-section is too small, so observe the input voltage according to the type plate.
What to do if the ventilator does not work on my Parkside Performance PPSK 40 A2?
If the ventilator on your Parkside Performance Cutter isn't working, it might be due to a few potential issues related to power. Check whether the device is connected to the socket. Also, the ventilator power line might be faulty, so check the device is connected to the socket. If the ventilator is faulty, check the device is connected to the socket.
Why can't I regulate the air flow on my Parkside Performance PPSK 40 A2?
If you cannot regulate the air flow on your Parkside Performance Cutter, it could be due to a damaged or faulty compressed air hose, so connect a new line. Alternatively, the valve/manometer might have failed, so connect a new line.
General| Brand | Parkside Performance |
|---|---|
| Model | PPSK 40 A2 |
| Category | Cutter |
| Language | English |
Device for compressed-air plasma cutting of electrically conductive metals, adhering to safety and assembly instructions.
Hazards include glare, hot parts, sparks, fire, and harmful emissions due to inadequate ventilation.
Lists included items: plasma cutter, earthing cable, cutting cable, cutting burner, electrodes.
Covers ventilation, sparks, arc beams, electromagnetic fields, and general warnings.
Guidelines for using welding masks, protective screens, and helmets during operation.
Addresses environments with increased electrical risk and relevant precautions.
Covers tight spaces, no-load voltages, carrying, and protective clothing.
Details protection against rays/burns and EMC device classification for industrial use.
Ensure adequate ventilation, free-standing placement, and dry working conditions.
Use selector switch for integrated or external compressor air supply.
Connect hose, set 4-4.5 bar, use filter/regulator, switch external air toggle.
Connects cutting burner, control plug, and earthing cable to respective sockets.
Fitting the removable roller guide for straight cutting guidance.
Setup, positioning, earthing, and powering on the plasma cutter.
Monitors device temperature and protective functions, indicating status with lights.
Hold burner low, angled, move at speed for spark concentration at bottom.
Hold burner 1.5-3mm above for penetration or furrow work, reduces splash.
Drill through by holding tip 3mm above, angle to guide sparks, press button, lower to form arc.
Switch off power, replace worn consumables like electrode, diffuser, and burner sleeve.
Regular maintenance ensures function and safety; repairs by qualified specialists.
Clean exterior with compressed air, cotton waste, or brush; contact for defects.
Store device in a clean, dry place to protect from dust when not in use.
5-year warranty from purchase date for material/manufacturing defects; proof of purchase required.
Warranty period begins on purchase date; retain sales receipt for service.
Period not extended by repairs; report immediate defects upon unpacking.
Covers material and manufacturing defects; device manufactured to strict quality guidelines.
Retain proof of purchase/IAN; contact service for malfunctions or defects.
Provides contact details for C. M. C. GmbH, including website, email, and phone.
